什麼是鑄鐵
鐵的合金,含碳2~4%,還含有數量不等的矽、錳、硫、磷。鑄鐵是在高爐內還原鐵礦石生產的,放出鐵水澆注冷卻成錠,稱為生鐵。鑄鐵與熟鐵不同,不能鍛造,只能鑄造成型,性脆、抗拉強度低,但產品價廉。鑄鐵有較高的抗壓強度,以致成為首要的結構金屬。18~19世紀時,鑄鐵是比熟鐵較為便宜的工程材料。20世紀建築業以鋼取代鑄鐵,但在工業中仍有許多用途,如汽車發動機缸體、農業機械和機器零件、管道、凹形器皿、火爐、熔爐等。按照斷面顏色,鑄鐵有灰口或白口之分。灰口鐵含矽較高,硬度較低,比白口鐵加工效能好。白口鐵和灰口鐵均較脆。18世紀,在法國發展了白口鑄鐵經長時間加熱處理生產可鍛鑄鐵。1948年在美國和英國發明瞭在鑄造狀態下就有延伸性的鑄鐵。這類韌性鑄鐵,現已形成重要的金屬體系,廣泛用於齒輪、模具、汽車曲軸和許多其他機械零件。
cast iron
Alloy of iron that contains 2-4% carbon, along with silicon, manganese, and impurities. It is made by reducing iron ore in a blast furnace (cast iron is chemically the same as blast-furnace iron) and casting the liquid iron into ingots called pigs. Pig iron is remelted, along with scrap and alloying elements, in cupola furnaces and recast into molds for a variety of products. In the 18th-19th century, cast iron was a cheaper engineering material than wrought iron (not requiring intensive refining and hammering). It is more brittle and lacks tensile strength. Its compressive (load-bearing) strength made it the first important structural metal. In the 20th century, steel replaced it as a construction material, but cast iron still has industrial applications in automobile engine blocks, agricultural and machine parts, pipes, hollowware, stoves, and furnaces. Most cast iron is either so-called gray iron or white iron, the colors shown by fracture; gray iron contains more silicon and is less hard and more machinable than white iron. Both are brittle, but malleable cast iron (produced by prolonged heat treating), first made in 18th-century France, was developed into an industrial product in the U.S. (see Seth Boyden). Cast iron that is ductile as cast was invented in 1948. The latter now constitutes a major family of metals, widely used for gears, dies, automobile crankshafts, and many other machine parts.
-
什麼是氣體放電燈
通過氣體放電將電能轉換為光的一種電光源。氣體放電的種類很多,用得較多的是輝光放電和弧光放電(見電弧放電)。輝光放電一般用於霓虹燈和指示燈。弧光放電可有很強的光輸出,照明光源都採用弧光放電。熒光燈、高壓汞燈、鈉燈和金屬鹵化物燈是應用最多的照明用氣體...
-
什麼是愛琴文化的建築
愛琴文化出現於公元前第3千紀,範圍及於愛琴海各島嶼、希臘半島和小亞細亞沿岸地區,以克里特島和希臘半島上的邁錫尼為中心,又稱克里特-邁錫尼文化,公元前12世紀以後湮沒。19世紀末對愛琴文化的考古發掘發現有城市、宮殿、住宅、陵墓和城堡等遺址。其建築佈局、石砌...
-
什麼是顏料後處理
又稱顏料化或顏料的商品化處理。原顏料經過各種加工處理,使之成為適用於某種專用介質(如塗料用合成樹脂等)的商品化過程。目前,較普遍使用的後處理方法有顆粒的表面處理、造粒、包膜、擠水、增大結晶度等。顏料經過後處理,即成為疏鬆的粉末狀、易於流動的厚漿或薄漿...
-
什麼是核電子儀器標準化
由於半導體技術的發展,核電子學儀器均採用積木式(即外掛式)結構,因此需要對外掛實行標準化。在這方面,首先需要解決儀器的機械和電氣互換性和資訊傳遞的規範問題。核儀器外掛(NIM)標準,是最早制訂的核電子儀器標準。它是美國原子能委員會核儀器外掛標準委員會於1964...